Comet system forum
Discussion forum about Comet system products
Temperature, Humdity,
Pressure Transmitters
and Data Loggers
You are not logged in.
#1 31-03-2009 15:50:26
- TGarabedyan
- Member
- From: Bulgaria
- Registered: 31-03-2009
- Posts: 7
- Website
Powering T3510
Our company just bought 24pcs of T3510.
The first (random) device which I take from the box lite all LED segmets on powering and never switch them off.
The power is provided by AC/DC adaptor - 15V, 1000mA.
The same happend with the next device and I don't dare to try another! What is wrong?
Not to comment that any communication with the device is unavailable.
Offline
#2 01-04-2009 06:57:50
- HonzaD
- Administrator
- Registered: 11-08-2008
- Posts: 294
Re: Powering T3510
Hi,
Probably your AC/DC adapter is wrong (maybe some power spikes and device is all the time restarting). Try disconnect Ethernet RJ45 and use OTHER type of power adapter (some 12V with min. 200mA). Check your AC/DC adapter with voltmeter and oscilloscope (if available).
John
Offline
#3 21-04-2009 13:04:39
- TGarabedyan
- Member
- From: Bulgaria
- Registered: 31-03-2009
- Posts: 7
- Website
Re: Powering T3510
Thanks for the advice.
I just change the adapter and everything is fine.
Offline