Comet system forum

Discussion forum about Comet system products

Temperature, Humdity,

Pressure Transmitters

and Data Loggers

You are not logged in.

#1 10-02-2009 09:47:04

daveroneb
Member
Registered: 10-02-2009
Posts: 5

T3511 - stop working with Tsensor program after firmware update

T3511 ethernet temp. & humidity unit
1.5.1.06 firmware
v2.3.0.0 Tsensor program

Following update to firmware the Tsensor program will not connect to device

WWW pages working

Device same subnet as pc and has worked Tsensor on prev. version normally
any help appreciated !

thankyou wink

Offline

 

#2 10-02-2009 11:02:57

HonzaD
Administrator
Registered: 11-08-2008
Posts: 294

Re: T3511 - stop working with Tsensor program after firmware update

Try factory default via Telnet on port 9999.

Code:

telnet <IP> 9999 

(e.g. command telnet 192.168.1.132 9999)

then press 7 .... factory default, 9 .... Seve and exit, and then try connect TSensor



John

Offline

 

#3 10-02-2009 12:27:00

daveroneb
Member
Registered: 10-02-2009
Posts: 5

Re: T3511 - stop working with Tsensor program after firmware update

Ok thanks John, worked a treat!

Offline

 

Board footer

Powered by PunBB | CZ / SK
© Copyright 2002–2005 Rickard Andersson