Hi,

We have the LAN adapter connected to a data logger that logs the information of 4 channels (temperature). I can use SNMP to read the values from the lan adapter MIB, but these only show the trap status. How can I use SNMP to read the actual sensor information?

Here's an snmp walk of the comet snmp tree:

$ snmpwalk -v1 -c public datalogatv enterprises.22626
SNMPv2-SMI::enterprises.22626.1.3.1.1.0 = ""
SNMPv2-SMI::enterprises.22626.1.3.1.2.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.1.3.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.1.4.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.1.5.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.1.6.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.1.7.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.1.8.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.1.9.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.2.1.1.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.2.2.1.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.2.3.1.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.2.4.1.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.2.5.1.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22626.1.3.2.6.1.0 = INTEGER: 0
End of MIB

Regards,

Rik