Comet system forum

Discussion forum about Comet system products

Temperature, Humdity,

Pressure Transmitters

and Data Loggers

You are not logged in.

#1 25-07-2007 10:15:19

Visitor
visitor
Registered: 01-06-2007
Posts: 37

Information console

Hello,
A client of us states that in the older t3511 versions it was possible to get a text only readout by telnet trough port 9996. This option was called “information console”. Is this option completely removed or is it reachable by another port?

Offline

 

#2 25-07-2007 11:59:29

PavelM
visitor
Registered: 29-05-2007
Posts: 45

Re: Information console

Information console was removed. If you need text output, you can use this procedure:

In this example we have working directory c:\netcat. T7511's IP is 192.168.1.27, SNTP server is enabled, www is enabled. Use firmware 1-4-5.01 or higher. In this firmware we have page "epocasi.html", whitch return current time, temperature, humidity and pressure. User can write own web page with another contents.
The source code of epocasi.html file is:

Code:

<%time%>
<%tmp%>
<%rh%>
<%pr%>

1. download and extract the NetCat program (http://www.vulnwatch.org/netcat/) to c:\netcat
2. create file "c:\netcat\data.bat" with followed lines:

Code:

GET epocasi.html

(after GET line must be 2 empty lines included)
3. run command line (cmd.exe) and switch to c:\netcat directory
4. press

Code:

type data.bat | nc -n 192.168.1.27 80

Output is:

Code:

HTTP/1.0 200
 Content-type: text/html
Connection: close
Cache-Control: max-age=10, must-revalidate


25.07.2007 11:59:10
25.9
41.1
969.7

Offline

 

Board footer

Powered by PunBB | CZ / SK
© Copyright 2002–2005 Rickard Andersson